Electrical Services in Dawsonville, GA | Trusted Local Electricians

Upon receiving a call about intermittent power in certain areas, I began by inspecting the affected circuits. After a thorough examination, it was determined that two outlets were the root cause of the issue due to visible burn marks and damage. Both outlets were carefully removed and replaced with new ones, ensuring all connections were secure and up to code. Following the replacements, I conducted a series of tests to confirm that the circuit was functioning correctly and that the problem had been fully resolved. The outlets now operate consistently, providing reliable power to the area.

Electrical Repair: Dispatched for a breaker repeatedly tripping under normal household load. Measured current draw and inspected connected devices and wiring. Determined circuit was overloaded by multiple high-demand appliances. Installed a new dedicated circuit to redistribute load, tested both circuits under full load, and confirmed breaker now operates normally.

Electrical Repair: Responded to an urgent call for a smoking outlet in the kitchen. Shut down power to the affected circuit, removed outlet, and inspected wiring. Found melted insulation and a burned receptacle due to loose connections. Replaced the outlet and damaged wiring, resecured connections, restored power, and tested to confirm safe operation.

Generator Installation: Dispatched to install a new standby generator for backup power. Selected proper location and verified clearance and ventilation requirements. Installed generator pad, positioned unit, and connected to existing transfer switch. Ran fuel line, connected electrical wiring to panel, and verified proper grounding. Performed initial startup, tested automatic transfer switch operation under simulated power outage, and confirmed generator starts, transfers, and runs safely under load.

Electrical Repair: Responded to repeated arc fault breaker trips in the living room. Inspected wiring and outlets and found damaged wire behind a wall plate causing arcing. Replaced damaged wiring, retested arc fault breaker, and confirmed that the breaker now operates properly without nuisance trips.

Electrical Repair: Customer reported lights flickering intermittently throughout the home. Inspected panel connections, branch circuits, and neutral wiring. Found a loose neutral connection at the main breaker panel causing voltage fluctuations. Tightened and secured neutral and hot connections, measured voltage stability, and confirmed flickering issue resolved.

Electrician diagnosed an issue with intermediate voltage in the dryer circuit and found the cord to be compromised in some sort of way. Electrician replaced the existing four prong dryer cord with a new four prong dryer cord after testing the voltage on the breaker the receptacle and the existing dryer cord.

Electrical Repairs: Dispatched to investigate a buzzing light switch reported by the homeowner. Found a failing switch with internal arcing. Replaced the switch, inspected wiring connections, and tested operation to confirm quiet and safe performance.

24/7 Electrical Repairs: Dispatched to troubleshoot a partial power outage affecting several areas of the home. Traced the issue to a failed breaker and damaged wiring within the panel. Replaced the breaker, repaired wiring, restored power, and tested all affected circuits to ensure stable operation.

Electrical Panel Installation: Arrived on-site to install a new electrical panel for the residence. Shut off the main power and confirmed all circuits were de-energized. Removed the old panel, inspected existing wiring, and installed the new panel with correctly rated breakers. Connected all circuits, ensured proper grounding and bonding, and secured the panel in place. Restored power and tested each circuit for correct operation. The new electrical panel is fully functional, safe, and meets current code requirements.