Affordable Electricians in Cumming, GA

Electrician came out to inspect and verify that the sauna wiring was installed correctly and safely. Electrician confirmed that the wiring was properly connected. Electrician also installed a new bidet outlet in the master bathroom, extending power from an existing GFCI-protected outlet. All work was completed and tested. Everything is functioning properly as intended.

Completed an electrical service visit to install two customer-supplied light fixtures, a countertop outlet, and a GFCI outlet in the garage. Mounted and connected both light fixtures, ensuring the wiring and connections were properly secured. Installed the countertop receptacle and added a GFCI outlet in the garage to provide ground-fault protection where needed. Tested the fixtures, switches, and outlets to verify proper operation and confirmed all newly installed components were functioning correctly upon completion.

Completed the installation of two customer-provided light fixtures, a new countertop receptacle, and a GFCI outlet in the garage. Removed existing fixture components as needed and connected the new lighting to the existing wiring. Installed and secured the countertop outlet and garage GFCI, ensuring the electrical connections were properly terminated. Tested both light fixtures for reliable operation and checked the receptacles, including the GFCI test and reset functions, to verify proper performance. All installed components were left operating as expected.

Completed an electrical service call to install a customer-supplied vanity light in the hallway bathroom. Removed the existing fixture as needed, inspected the mounting area and wiring, and connected the new light fixture to the existing electrical supply. Secured the fixture in place and verified that all wiring connections were properly installed. Tested the light switch and vanity light to confirm proper operation and ensure the fixture was functioning as expected before completing the service.

Completed electrical work to prepare two upstairs bedrooms for ceiling fan installation. Ran new electrical circuits from the existing switches to newly installed fan-rated electrical boxes centered in each bedroom. Secured and routed the wiring appropriately, made the necessary electrical connections, and ensured both fan boxes were properly mounted to support the new fixtures. Checked the completed wiring and connections to verify they were ready for the next stage of installation. Both bedrooms were left prepared for ceiling fan installation.

Completed electrical work involving the landscape lighting, bathroom circuit, and installation of a new GFCI outlet. Troubleshot the landscape lighting system and addressed the identified issues to restore proper operation. Worked on the bathroom circuit to ensure the wiring and connections were properly secured and functioning as intended. Installed a new GFCI receptacle, verified the electrical connections, and tested the outlet's ground-fault protection. Checked the completed work and confirmed the serviced components were operating properly.

Electrician came out to diagnose a range that was not working and was tripping the breaker whenever the range was plugged in and the breaker was turned on. During the diagnosis, the electrician found that the neutral and ground were connected together inside the range. The electrician corrected the wiring by separating the neutral and ground connections. After completing the repair, the range was tested and is now operating properly without tripping the breaker.

Installed two dedicated electrical circuits from the main panel in the garage, routed through the drywall to an exterior wall near the A/C unit. Installed a junction box feeding a GFCI device and flexible conduit, secured to the exterior of the house and extended underground to a post providing power to receptacles at the septic tank.

Dispatched to a residence in Cumming after a homeowner reported flickering lights and a distinct buzzing sound coming from their main service panel whenever the central AC engaged. We performed a thermal diagnostic scan across all branch connections and identified loose bus bar terminations alongside minor heat degradation on an aging panel. We replaced the compromised breakers, retorqued all main lug connections to proper torque specifications, and balanced the leg loads to restore a steady 240V supply throughout the entire home.